Good news ! Skiphire.com have general waste skips available for hire in Bacup.

Skip Hire FAQs

  • What skip size should we order ?

    It’s not just a case of how much waste you have! You also need to consider how much room you have on your site and will then need to think about the type of waste you will be disposing of. For example if the waste is heavy (e.g. soil/brick/rubble) then you will be restricted as to how large a skip you can have. When only a single skip is expected, we strongly believe that it’s better to hire a skip that you may not quite fill, as opposed to ordering a skip which ends up being too small meaning a second skip is then required as a result. In other words it’s better to overestimate than underestimate!

    Click here to for more information on our skip sizes.

  • How should the skip be loaded ?

    When filling a skip it can only be loaded to the height of the actual skip itself.

    It is important that you or anyone using the skip are aware of this, as it is against the law for drivers to carry over loaded skips on the highways. Using boards around the skip in an attempt to increase it’s capacity (known in the trade as greedy boards) is illegal.

    If a driver arrives on site to find an overloaded skip they are likely to leave without the collecting the skip, and this will incur additional charges.

  • How long can we skip the skip for ?

    The maximum hire period is 10 days but as a general rule we don’t like to impose restricted hire periods. If you need ongoing skip hire where numerous skips are required and exchanged on a regular basis then there is nothing to worry about. If you need your skip that for more than 10 days without exchanges please let us know when we confirm your order.

  • Can we place the skip on private property ?

    As long as you have privately owned property for the skip to be sited on, such as a driveway (minimum 10ft width access required), accessible front garden (ie. no fence or walls), a service yard, site compound or privately owned carpark then we can arrange for the delivery of your skip with no further actions required or additional costs incurred. Please be aware though that any delivery you request to be carried out on private property is done so, excluding driver negligence, at your own risk.

  • Can we place the skip on the road ?

    Depending on the road type (and any local traffic restrictions) an application for a highways permit will need to be made to the local council in order to site the skip on the road (or verge) in front of your property. In the vast majority of cases we are able to arrange for this on your behalf.

    Unfortunately there is usually an additional charge for this and the amount charged, together with the number of working days needed to process the application, does vary from council to council. Please also be aware that as the hirer of the skip it would be your responsibility to ensure that it is lit and coned for the duration of the hire period. 

    Your local council website has details of permits costs and how to apply. 

    Click here for more information on skip hire permits in your local area.

     

  • Are there any access restrictions for the skip lorries ?

    A standard skip or roll-on-off vehicle usually requires a minimum of 10ft (3.3m) width and approximately 13ft (4m) headroom to safely gain access to a site. If your site access falls a little below these requirements we are able to (in most areas) arrange for smaller skips (depending on waste type) to be delivered on smaller lorries.

  • Is there anything I can’t put in a skip ?

    Though we usually can arrange for the safe and legal disposal of any type of waste, there are certain types of waste that cannot be placed in general waste skips under any circumstances.

    Examples of waste types that CANNOT be placed in your skip include:

    • Asbestos
    • Cement fibre board/other fibrous products
    • Plasterboard
    • Carpets & vinyl floor coverings
    • Paint tins (full, partially full or empty)
    • Artificial turf
    • Contaminated soils (eg. with kerosene),
    • Electrical items (WEEE) including fridges/freezers
    • Mattresses
    • Tree stumps and roots
    • Batteries
    • Tyres
    • Gas cylinders, aerosols & pressurised containers
    • Resins & Adhesives
    • Food Waste
    • Clinical waste (eg. nappies, sanitary products, syringes)
    • Fluorescent light tubes
    • Corrosive substances
    • Liquids & chemicals.

    Please be aware that this list is for guidance only and not exhaustive. If you have any doubts about the waste you are disposing of, please contact us.

    Additionally if you DO have any waste type listed above then please proceed to submit a quotation request as we may still be able to arrange the disposal for you.

What size skip do I need ?

Comparison of 4yd skip and a man and van

4 yd Midi Skip

Our smallest skip can hold around 40 rubbish bags of waste. At around 1.8m x 1.2m x 1.0m (length x width x height) it can fit on most drives.
Some of the most popular uses for a 4 yd skip are:

Home Clearances

  • Clearing out a garage, loft, or shed
  • General household junk removal

Garden Work

  • Hedge trimmings, branches, and garden waste
  • Soil and turf removal (although you need to be careful it doesn’t get too heavy)
  • Patio or decking clearance

Small Renovations & DIY

  • Bathroom or kitchen strip-outs
  • Plasterboard, timber, and rubble from small jobs
  • Flooring removal (tiles, carpet, laminate)

Moving House

  • Getting rid of items you don’t want to take with you

6 yd Builders

A versatile skip suitable for all waste types a 6 yd builders skip can handle a wider range of projects including small construction projects and landscaping work. It can hold around 60 rubbish bags of waste and at approximately 2.6m x 1.5m x 1.2m (length x width x height) is still an easy fit into tight spaces.

6 yd skips are recommended for:

Bigger Home Clearances

  • Full house or flat clearance
  • Multiple room clear-outs in one go
  • Larger loft, garage, or outbuilding clears

Renovation & Building Work

  • Kitchen or bathroom refits with more waste
  • Plastering, dry-lining, and timber from larger jobs
  • Window or door replacements
  • Flooring across multiple rooms

Garden & Landscaping

  • Larger landscaping projects
  • Fence replacement and decking removal
  • Bigger amounts of soil, rubble, or hardcore

8 yd Maxi Skip

An 8 yard skip is a large skip — the biggest size that’s still commonly used for domestic jobs, and the standard choice for most trade and construction work. It can hold around 80 rubbish bags and at 3.2m x 1.7m x 1.2m (length x width x height) can fit in most drives – although we always recommend measuring.

8 yd skips are great for:

Large Home & Commercial Clearances

  • Full house clearances, especially larger properties
  • Office or retail unit clear-outs
  • Estate clearances

Significant Renovation Work

  • Full house refurbishments
  • Extensions and structural work
  • Multiple bathroom/kitchen refits at once
  • Roof work — tiles, felt, and timbers

Construction & Trade Use

  • Builders’ general site waste
  • Brick, block, concrete, and mixed rubble
  • Joinery and fit-out waste
  • Demolition debris (partial)

12 yd Bulk Skip

A 12 yard skip is a large industrial-sized skip — the kind you typically see on bigger construction sites or major renovation projects. It is only suitable for light waste. It will hold around 120 bags waste and is 3.2m x 1.7m x 1.2m (length x width x height)

12 yd skips are great for:

Large Commercial Clearances

  • Warehouse or factory clear-outs
  • Large office refurbishments
  • Retail fit-outs and strip-backs
  • School or public building clearances

The 12 yard is really for trade, commercial, or major project use — for most homeowners it’s more skip than you’ll ever need, but when the job demands it, it saves a lot of hassle versus multiple smaller collections.